What are the main applications that an HP graphite electrode is used? To understand this important mechanism and the ways it works, you must understand more about the machines it helps to power.
This type of electrode is a https://graphiteelectrodesforsale.com/hp-graphite-electrode/. It is made to discharge electricity. This type of electrode is almost always used for the application of an electric arc furnace within a steel mill.
An electric arc furnace is made to act as a giant recycling machine. There is a large container into which scrap metal is fed. This metal can come from cars or appliances.
The material goes into the container. This is screened through the machine before it is allowed into the container. Once this occurs, the operator moves the top of the furnace back over the container and then the container is lowered into its place.
The roof contains the electrodes They are typically about 75 millimeters in diameter and can be as long as 3400 millimeters. The largest of the electrodes can weigh over two tons.
The electrodes are selected by the manufacturer and will often be installed in threes along several columns. The electrodes get connected with one another with the assistance of a screw on either end. Electricity is fed into them and they power the heat to make the furnace work.
This is how they are incorporated into the machine. The electric arc furnace is the main application for these electrodes, but they are also used in ladle furnaces.
They are made of petroleum coke or needle coke and have coal tar as their binder to release electrical charges properly into the machine. The coke can be produced from either petroleum or coal. The highest quality HP graphite electrodes resist oxidation and corrosion from acids or alkali.
When they are in the electric arc furnace or the ladle furnace they discharge electric energy and melt the contents of the container. They are often used in steelmaking in addition to recycling metals.
To find the HP graphite electrodes best for your facility you need to work directly with an online quality manufacturer of these. Choose the ones that meet your preferences. Many of the top companies use petroleum for the electrodes and others use coal.
If you are not sure which is right, ask a representative for more help. As the person overseeing the steelmaking or other process, it is up to you to select the right sized electrode. This gives you the power and the freedom to choose the ones that will work best to help your company produce the most it can every day.
These products are the only ones available that can conduct high-level electricity while sustaining the high temperatures, usually over 3000 degrees, to generate the steel needed from your furnace.
There are several grades of electrodes to choose from. HP or high power is just one. If you are working with smelting or steelmaking, this is most likely the right choice for your factory’s needs. Read more on this page: https://graphiteelectrodesforsale.com/